Product Categories

Pressure Temperature Transmitter

[427]

PLC Programmable Logic Controller

[316]

Perfluoropolyether Fluorinated Fluids

[45]

Industrial Centrifugal Fan

[12]

Contact Now

Shenzhen Wisdomlong Technology CO.,LTD

Visit Website

City:shenzhen

Province/State:guangdong

Country/Region:china

Contact Person:MissBecky

View Contact Details

Contact Now

China IC9445B200AB GE FANUC Limit Switch Lever Watertight Standard Contact 2 Circuits IC9445B200AC wholesale

IC9445B200AB GE FANUC Limit Switch Lever Watertight Standard Contact 2 Circuits IC9445B200AC

Ask Latest Price

Video Channel

Brand Name :GE

Model Number :IC9445B200AB

Place of Origin :USA

MOQ :1

Price :negotiable

Payment Terms :T/T, Western Union，paypal, Western Union

Supply Ability :100. Ali.

Delivery Time :5-8 work days

Packaging Details :New in original box

Certification :dose not supply

Resistance ranges :0 to 500 ohms，0 to 3000 ohms

Temperature sensitivity (0° to 60°C) + :+/–0.004% of reading, +/–1.5µV per °C referred to input

Maximum lead resistance :5 ohms per lead

Update Rate :210 ms

Power Consumption :125 mA from +5V bus

No. of channels :4 (3-wire and/or 4-wire RTDs)

Contact Now

Add to Cart

View Product Description

IC9445B200AB GE FANUC Limit Switch Lever Watertight Standard Contact 2 Circuits

Product Description

Limit Switch, Lever, Watertight, Standard Contact, 2 Circuits

Limit Switch, Lever, Watertight, Standard Contact, 2 Circuits, IC9445 Lever Limit Switch

Technical Specifications

Nominal Rated Voltage:	120/240 VAC or 125 VDC
Input Voltage Range:	85 to 264 VAC or 100 to 300 VDC
Input Power:	90 VA with VAC or 50 W with VDC
Load Capacity:	30 Watts
Location on Baseplates:	Left most Slot
Communication:	RS 485 Serial Port

▪ Selectable resistance measurements in tenths of ohms, tenths of degrees Fahrenheit, or tenths of degrees Celsius ▪ Individual channel configuration ▪ Selectable resistance ranges: 0 – 500 ohms and 0 – 3000 ohms ▪ Selectable RTD input as resistance or temperature (Celsius or Fahrenheit) ▪ Reports high/low, under-range/over-range, open wire and input short alarms. ▪ Two data acquisition rates based on 50 Hz and 60 Hz line frequencies ▪ Configurable channel activation The module automatically performs A/D calibration at powerup. Automatic calibration is then repeated periodically to compensate for changes in the ambient temperature.

LED Indicator
The OK LED indicates module status: ▪ On green indicates normal operation ▪ Flashing green indicates boot mode or update ▪ Flashing amber indicates self-diagnostic error ▪ Off indicates no 3.3V backplane power.

Using the Module in Hazardous Locations
▪ WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2;
▪ WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE REPLACING OR WIRING MODULES.
▪ WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS.
▪ Equipment labeled with reference to Class I, Div. 2, Groups A, B, C and D, Hazardous Locations is suitable for use in Class I, Div. 2, Groups A, B, C, D or non-hazardous locations only.
▪ Equipment labeled with reference to Class I, Zone 2, Groups A, B, C and D, hazardous locations is suitable for use in Class I, Zone 2, Groups A, B, C, D or non-hazardous locations only.
▪ Be sure to read the installation instructions provided with the module and its terminal assembly. These instructions specify the use of copper conductors and wire gauge and type requirements.

Company profile:

Shipping:

Product Tags: