1PCS Siemens 6DD1610-0AH6 6DD SIMATIC TDC MC510 memory mod 8MB Flash Made in Germany

1PCS Siemens 6DD1610-0AH6 6DD SIMATIC TDC MC510 memory mod 8MB Flash Made in Germany

In order to determine the stroke positions 0 % and 100 % in the valve, calibration is required on initial commissioning:
Prerequisites
∂ Mechanical coupling of the actuator SKD6.. with a Siemens valve
∂ Actuator must be in «Automatic operation» enabling stroke calibration to capture the effective 0 % and 100 % values
∂ AC 24 V power supply
∂ Housing cover removed

For media below 0 °C the ASZ6.6 stem heater is required to keep the valve from freezing. For safety reasons the stem heater is designed for an operating voltage of AC 24 V / 30 W.
For this case, do not insulate the actuator bracket and the valve stem, as air circulation must be ensured. Do not touch the hot parts without prior protective measures to avoid burns.
Non-observance of the above may result in accidents and fires!
Recommendation: Above 140 °C insulating the valves is strictly recommended.

Safety regulations and restrictions designed to ensure the safety of people and property must be observed at all times!

The plant operator must also ensure compliance with applicable guidelines on cable insulation when using a safety limiter. Failure to comply may cause the safety limiter function to fail.

SIMILAR PRODUCTS

6DD1681-0CB2
6SY8101-0AA43
6SY8102-0LA02
6SY8102-0LA04
6SY8101-0AA73
6SY8101-0AA33
6DD1681-0CB2
6SN1118-0DG23-0AA1
6DD1681-0GK0
6DD1661-0AE1(6DD1661-0AE0)
6DD1660-0BH0
6DD1682-0DA1
6DD1688-0AE0
6DD1681-0GK0
6DD1607-0AA2
6DD1607-0CA1
6DD1684-0GD0
6DD1610-0AG1
6DD1600-0BA2
6DD1610-0AH6
6DD1682-0CH2
6DD1681-0GK0
6DD1682-0CG0
6DD1607-0AA2
6DD1842-0AA1
6DD1607-0CA1
6DD1842-0AB1
6DD1610-0AH3
6DD1610-0AH6
6DD1607-0AA2
6DD1684-0GD0
6DD1684-0FE0
6DD1684-0AH0
6DD1684-0BH2
6DD1684-0EK0
6DD1684-0BC0
6DD1684-0FF0
6DD1610-0AH0
6DD1607-0AA2
6DD1684-0GD0
6DD1681-0GK0
6DD1607-0CA1
6DD1607-0EA0
6DD1607-0AA2

OTHER SUPERIOR PRODUCTS