Shenzhen Wisdomlong Technology CO.,LTD
Shenzhen Wisdomlong Technology CO.,LTD Work hard and best service for you!
Add to Cart
Honeywell CC-PDIH01 51405041-175 Digital Input Module Made in USA Redundant Power Supply Module
QUICK DETAILS
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
SIMILAR PRODUCTS
The C300 Controller is constructed using the Series C form factor that employs an Input Output Termination Assembly (IOTA) and an electronics module which mounts and connects to the IOTA. One C300 Controller contains all of the control functionality and the communications functions with plug-in modules. The C300 Controller may operate in both non-redundant and redundant configurations. Redundant operation requires a second identical controller and connecting cables, which is the typical configuration. The C300 Controller is connected to the associated I/O hardware by a pair of I/O Link Interface cables The table below identifies the C300 Controller components and its associated components. TheC300 Controller supports non-redundant and fully redundant operation. Redundancy is built in to the controller, so that just adding another controller and a redundancy cable; a redundant controller pair is achieved. Note that the ‘CC’ designation on the model number indicates the printed wiring boards are conformally coated for additional protection from the environment, (CU = uncoated).
Highlights
Any 36 V instrumentation amplifiers with unity gain stable can be used as the buffer amplifier in the PLC input module. However, as mentioned in Section 3.23, dc errors from the offset voltage (VOS), VOS drift (VOS(DRIFT)), gain error and gain nonlinearity, CMRR, and PSRR affecting the VOUT performance. Therefore, selecting an instrumentation amplifier with low offset voltage, low offset drift, high CMRR, and high PSRR will prevent the amplifier from reducing the performance of the ADC. Table 12 lists several optional instrumentation amplifiers that will work well in this application
