Add to Cart
OMRON AC Servo driver Pulse Train Inputs Single-Phase R7D-BP02HH controller original
| Item | Specifications | ||
|---|---|---|---|
| Ambient operating temperature Ambient operating humidity | 0 to 55 °C, 90% max. (with no condensation) | ||
| Ambient storage temperature Ambient storage humidity | -20 to 65 °C, 90% max. (with no condensation) | ||
| Storage and operating atmosphere | No corrosive gasses, no dust, no iron dust, no exposure to moisture or cutting oil | ||
| Vibration resistance | 10 to 60 Hz; acceleration: 5.9 m/s2 (0.6 G) max. | ||
| Impact resistance | Acceleration of 19.6 m/s2 max. 3 times each in X, Y, and Z directions. | ||
| Insulation resistance | Between power supply/power line terminals and frame ground: 0.5 MΩ. min. (at 500 VDC) | ||
| Dielectric strength | Between power supply/power line terminals and frame ground: 1,500 VAC for 1 min at 50/60 Hz Between each control signal and frame ground: 500 VAC for 1 min | ||
| Altitude | 1,000 m above sea level max. (860 hp min.) | ||
| Degree of protection | Built into panel (IP10). | ||
| International standards | EC Directives | EMC Directive | EN 55011 class A group 1 EN 61000-6-2 |
| Low Voltage Directive | EN 50178 | ||
| UL standards | UL 508C | ||
| cUL standards | cUL C22.2 No.14 | ||
| Korean Radio Regulations (KC) | Certified | ||
| Item | Servo Drive model | |||
|---|---|---|---|---|
| R7D-BP01H | R7D-BP02HH | R7D-BP02H | R7D-BP04H | |
| Continuous output current (rms) | 1.0 A | 1.6 A | 1.6 A | 2.5 A |
| Momentary maximum output current (rms) | 3.3 A | 4.9 A | 4.9 A | 7.8 A |
| Power supply capacity | 0.27 KVA (0.30 KVA) * | 0.35 KVA | 0.42 KVA | 0.69 KVA (0.77 KVA) * |
| Input power supply voltage (main circuit) | Both single-phase and three-phase 200 to 240 VAC (170 to 264 V), 50/60 Hz | |||
| Input power supply current (rms) (main circuit) | 0.7 A (1.5 A) * | 1.6 A | 1.1 A | 1.8 A (3.5 A) * |
| Heat generated (main circuit) | 14 W | 16 W | 20 W | 26W |
| Control method | All-digital servo | |||
| Inverter method | IGBT-driven PWM method | |||
| PWM frequency | 12 kHz | 6 kHz | ||
| Maximum response frequency (command pulses) | Line drive: 500 kpps, Open collector: 200 kpps | |||
| Weight | 0.35 kg | 0.42 kg | 0.35 kg | 0.42 kg |
| Applicable motor capacity | 100 W | 200 W | 200 W | 400 W |
Similar Model Products
| Specifications | Model | |
|---|---|---|
| Single-phase 100 VAC | 50 W | R7D-BPA5L |
| 100 W | R7D-BP01L | |
| 200 W | R7D-BP02L | |
| Single-phase/three-phase 200 VAC | 50 W | R7D-BP01H |
| 100 W | ||
| 400 W | R7D-BP04H | |
| Single-phase 200 VAC | 200 W | R7D-BP02HH |
| Three-phase 200 VAC | 200 W | R7D-BP02H |
About US:

Shipping:
